Hovedindhold

## Laws of thermodynamics

Aktuel tid:0:00Samlet varighed:8:56

# Mere om entropi

## Video udskrift

I'm going to do one more
video on entropy. Maybe I'll do more
in the future. But I thought I would at least
right now do one more, because I really want to make clear
the idea of entropy as a macrostate variable. So let me write that down. An S, which is entropy, is
a macrostate variable. I'm going to write macro
in bold red. It's a macrostate
state variable. And I want to emphasize this. And I talked a little bit about
it in my previous video, but I think even then I wasn't
as exact as I needed to be. And the reason why I want to
say it's macro is because there's a very strong temptation
to point to particular micro states and
say, does this have higher entropy or lower entropy
than another? For example, the classic one. Even I did this. Actually, let me make a
bigger, thicker line. So you have this box that
has a divider in it. We've gone through this
multiple times. Let me draw the divider
like right there. OK. So at first if we have a
system where all of the molecules are over here-- so
that's our first scenario. And then our second scenario,
we've studied this a lot. We blow up the wall here. And we actually calculated
the entropy. Control. OK. Let me copy it and then
I'm going to paste it. Let me put these next
to each other. All right. So I have these two things. And then the second time,
I blew away this wall. Let me blow it away. Let me erase the wall there. And then we said, once the
system reaches equilibrium again-- remember, these
macrostate variables, like pressure, like volume, like
temperature, like entropy, are only defined once the system
is in equilibrium. So once the system is in
equilibrium again, these particles are now-- I wanted the
same number of particles, so let me erase some of these
particles, let me move them. Let me see if I can
select some. There. So we'll have a more even--
Let me just redraw. 1, 2, 3, 4, 5, 6,
7, 8 particles. Let me erase what I have. And
I'll make it with a more even distribution. So then, once I blow away the
wall, I might have 1, 2, 3, 4, 5, 6, 7, 8. Now, the reason why I'm doing
all of this is because there's a temptation to say that this
state, what I just drew you when I, you know, made sure to
blow these away and draw 8 more, I drew a microstate. This is a microstate. Anytime someone is actually
drawing molecules for you, they're drawing a microstate. Now, I want to be very clear. This microstate does not have
more entropy than this microstate. In fact, microstates you
don't have entropy. Entropy does not make sense. What you can say is a system--
and this time, I'm going to draw it without the particles. That if I have a container
that is this big, that contains-- so it has
some volume. So volume is equal to v1. Its temperature is equal
to a t1, and it has 8 particles in it. This has some entropy
associated with it. And what we can say, is if we
were to double the size of this container, which we did by
blowing away that wall, now all of a sudden our volume is
equal to 2 times v1, if we say this is double. Our temperature is still
equal to t1. We saw that a few videos ago. And we still have 8 molecules. The entropy of this
system is higher. So now entropy is higher. And I want to make this very
clear, because you never see it drawn this way. People always want to draw
the actual molecules. But that confuses the issue. When you draw actual molecules,
you're showing a particular state. For example, this system, if
we were to actually measure the microstate, it could be--
there's a very, very infinitesimally probability--
but all of the molecules, all 8 molecules might
be right there. I mean, it's almost, you know,
you could wait for the whole universe to come and go, and
it might not happen. But there is some probability
it would happen. So you can't assign entropy
to a particular state. All you can do is assign it
to a particular system. I want to be clear about that. So even I talked about
a clean and dirty room and all of that. Clean versus dirty room. And the point I was making is,
the entropy of a room is not dependent on its cleanliness
or its dirtiness. In fact, you could kind
of view these as states of a room. But even more, these
really aren't even states of the room. Because when a room is clean, or
a room is static at a macro level, they're static. If my books or lying like--
you know, sometimes people look at a deck of cards and
say, oh, if I have all my cards stacked up like this, or
if I have all my cards that are all messy like that, that
this has higher entropy. And I want to make
it very clear. I mean, maybe you can kind
of make an analogy. But that's not the case. Both of these systems
are macrostates. For example, it's not like
these cards are vibrating around any more than
these cards are. It's not like these can take
on more configurations than these cards can. So when you talk about entropy,
you're trying to take a macro variable that's
describing at a micro level. And the cards themselves are not
the micro level, because they're not vibrating around
continuously due to some kinetic energy or whatever. It's the cards' molecules that
are at the micro level. And if these cards, if you have
the same mass of cars as you have here, and if they're
at the same temperature, the molecules in these cards can
take on just as many states as the molecules in these cards. So they're going to have
the same entropy. Entropy is a macrostate
variable, or a macrostate function, that describes
the number of states a system can take on. So here, I would view the
cards as a system. And what we care about is not
the number of configurations the cards themselves
can take on. The cards aren't constantly
vibrating and changing from one thing to another. It's at the atomic level, at the
molecular level, that as long as we're above absolute
zero, which we pretty much always are, things are going
to be vibrating around continuously, and continuously
changing its state. So it's almost impossible
to measure the state. And since it's impossible to
measure the state, we use something like entropy to
say, well, how many states can we have? And I mean, all of these things,
entropy, whether we call it internal energy, whether
we look at entropy, whether we look at pressure,
volume, temperature. These are all, if you can think
about it in some way, these are shortcuts around
having to actually measure what each molecule is doing. And entropy, you can kind of
view it as a meta shortcut. I mean, temperature tells you
average kinetic energy, this tells you all of the energy
that's in it, this tells you, you know, how frequently the
molecules are bumping against a certain area. This tells you, on average, kind
of where the outermost molecules are. Entropy is kind of a, you
can almost view it as a metastate variable. It tells you how many states,
how many micro states can we take on? And so I just want to make this
very clear, because this is often confused, and there's
a very, very, very strong temptation to point to a
particular state and to say that that has higher entropy
than another, that somehow this state is more entropic
than that state. That's not the case. This system is more entropic
than this system, than this half box. It has more volume. If it has the same temperature
with more volume, then its particles can take on more
possible scenarios at any given moment in time. Anyway, hopefully you found
that a little bit useful. I just want to make it very,
very, very clear. Because this is often, often,
often confused. It is a macrostate variable for
a system, where a system is composed of things that are
bumping around randomly. Every millionth of a second,
they're changing states, so it's very hard to even measure
one of the microstates. You can't point to a microstate,
and say, oh, this has higher entropy
than another. Anyway. See you in the next video.